Rosewood Piano Finish Wall Plaque with 4 x 10 Inch Engraved Plate

A rosewood piano finish wall plaque is a lacquered wood award panel with an engraved plate on the front, hung on a wall to recognize a person, team, or milestone permanently. Organizations order it for years-of-service awards, retirement gifts, donor walls, and sponsor recognition. The engraved text does not fade or peel the way a printed label does.

The two options differ only in panel color, not in size, construction, or decoration method. Rosewood shows a warm reddish-brown wood grain under the high-gloss lacquer, while black reads as a solid dark surface that throws more contrast behind a light engraved plate. Pick the one that matches awards your organization has already issued so a wall of plaques stays consistent.

The 4 x 10 inch plate sits on a 6 x 12 inch panel, leaving roughly a 1 inch band of piano finish visible on all four sides. That border frames the engraving instead of competing with it, and it is the reason long award titles should be planned to the plate size rather than the panel size. One panel size is offered, so layout decisions happen inside the plate area.

Piano finish is a multi-coat lacquer built up over a wood panel and polished to a mirror gloss, the same finishing approach used on piano cabinets. A mirror gloss shows fingerprints and fine surface scratches more readily than a matte lacquer, so handle the panel by its edges during assembly and presentation. The engraving is cut into the mounted plate, not into the lacquer, so the finish stays sealed.

Yes, laser engraving reproduces both a logo and text on the mounted plate. Send vector artwork so thin strokes and small type engrave cleanly at 4 x 10 inches. Laser engraving marks in a single tone from the contrast between the engraved mark and the plate surface, so gradients and multi-color logos need to be converted to a one-tone version before production.

Production runs 5 working days from artwork approval. That clock starts when you sign off on the proof, so allow additional days beforehand for artwork setup and proofing, and additional days afterward for transit. Give us the in-hands date for your ceremony and we will work the schedule backward from it.

Wall plaques are ordered most often for employee years-of-service and retirement recognition, board and donor acknowledgment, sponsor and partner appreciation, dedication of a building or room, sales and safety milestone awards, and school or club hall-of-fame displays. Any occasion where the award stays on a wall for years suits a plaque better than a desk piece. Recognition programs that repeat annually usually reorder the same finish to keep the display uniform.

Wipe the lacquered panel with a dry or barely damp microfiber cloth, working with the grain. Skip ammonia-based glass cleaners, solvents, and abrasive pads, all of which cloud a high-gloss lacquer over time. Keep the plaque out of direct sunlight and away from heat vents, and clean the engraved plate with the same soft cloth rather than metal polish.

Per-unit cost is quoted per order because it moves with quantity, with the amount of engraving on the plate, and with freight. Larger quantities lower the per-piece price, and the 3 lb shipping carton means freight is a meaningful share of the total on orders of only a few pieces. Send us your quantity, finish choice, and engraving copy and we will price it against the current tier.

No certifications are published for this plaque. As a decorative wall item with no food contact and no intended use by children, it falls outside FDA food-contact rules and toy safety standards. If your procurement process requires compliance documentation, ask before you order and we will request what is available.