Which wood is the beechwood plaque award cut from?

The beechwood plaque award is cut from a single piece of pale blond beech. No veneer, backing board or applied plate is used. The wave along the top edge is shaped from the same block as the face.

How does the beechwood plaque award stand without a base?

The beechwood plaque award is 1.375 inches thick, which is enough to hold it upright on its own. The bottom edge is cut flat so the piece sits level on a shelf or desk. No easel, strut or wall fixing is supplied or needed.

What decoration goes on the beechwood plaque award?

The beechwood plaque award takes laser engraving or full colour printing on the front. Engraved text burns dark brown into the wood and includes one colourfill. Printing is chosen when a crest or logo has to keep its own colours.

How big is the engraving area on the largest size?

The beechwood plaque award allows 4.75 by 7.125 inches of engraving on the largest size. The middle size takes 4.375 by 6.5 inches and the smallest 4.125 by 5.75 inches. A banner, a name and a short citation fit inside that space.

Can a ribbon banner be engraved above the name?

The beechwood plaque award has room for a ribbon banner above the recipient name. Engravers often place the programme title in the banner and the citation underneath. Layout is settled at proof stage before anything is cut.

What sizes are offered for this wave top piece?

The beechwood plaque award comes in three sizes, 4.75 by 6.25 inches, 5 by 7 inches and 5.5 by 7.875 inches. All three share the same 1.375 inch thickness. The tallest suits a long citation, the smallest a crowded shelf.

How long does production run after approval?

The beechwood plaque award is made in five working days once artwork is approved. That period begins at proof approval, not when the order is raised. Carriage time is added after the piece leaves the bench.

Will a one piece order be accepted?

The beechwood plaque award can be ordered as a single piece. A one off retirement presentation is therefore possible without a batch. Unit price moves with quantity, size and the decoration method chosen.

Freestanding Beechwood Award with Contoured Wave Top

Name: Promotional Product Inc
Address: 9835 Pineville-Matthews Rd. #1000, Pineville, NC, 28134, US
Telephone: 1-888-212-5501

SKU 1258371

Included: Includes 1 Colorfill
Area: Front of Award: 4.125" x 5.75"
Production: 5 business days

From$58.50per unit

Minimum1units

Ships in5business days

Call us

$58.50/unit at 1

Order today, ships Mon, Nov 2

Quantity

units

1 × $58.50: $58.50
Laser Engraving$80.00 setup + 1 × $10.00 run: $90.00
Shipping: Destination ZIP code
Digital Visual Proof: FREE

Total$148.50

You approve a free proof before anything prints

Add your logo nowOptional — or send it after you order

Your artwork

Optional — we can collect it on the call

Drop your file here or browse

PDF, PNG, JPG, SVG, AI, EPS — max 4 MB

Imprint / logo text

Special instructions

Order a Sample

No hidden costWorry-free purchaseLowest Price Guarantee

Questions? Chat with us

Need it by a date?Ships in 5 business days

In-hand date (the day you need them, not the ship day)Rush this orderCuts production where the supplier allows it. A specialist confirms it. There is no rush price on this page because there is no rush rate to quote.

Ships Mon, Nov 2Counted in business days from proof approval, not from the order. Weekends and US holidays are skipped.

We carry both to checkout, so you will not be asked twice. Nothing is charged until you approve your proof.

Totals are quantity × unit price. One-time setup and shipping are added in Your Order.

$0 Reorder SetupReorders skip the fee entirely
Lowest Price GuaranteedWe beat any written quote
On-Time DeliveryWe hit your in-hand date
A+ BBB AccreditedServing US brands since 1997

1-888-212-5501Mon–Fri, 9am–6pm ET

Talk to a Product Expert

Key Features

Solid beech 1.375 in from front to back
Wave contour cut along the upper edge
Freestanding, no easel or wall hook
Engraved lettering finished with a single colourfill
Heights of 6.25, 7 and 7.875 in
Weighs 0.8 pounds without packaging

Show all 7 features

Printing reproduces crest colours exactly as drawn

Compare Similar Wood Awards & Trophies

Thick Freestanding Beechwood Award with Slanted Peak TopSolid beechwood block, 1.5 inches thick
from $55.50 eachAll prices
- 1 pieces$55.50 each
- 7 pieces$54.50 each
- 13 pieces$53.50 each
- 25 pieces$52.50 each
- 50 pieces$51.50 each
Round Beechwood Award with a Carved Pointed TopSolid beech with visible natural grain
from $61.50 eachAll prices
- 1 pieces$61.50 each
- 7 pieces$60.50 each
- 13 pieces$59.50 each
- 25 pieces$58.50 each
- 50 pieces$57.50 each
Beechwood Peak Award with Lined Groove EdgeTwo part build, upright plus block base
from $56.50 eachAll prices
- 1 pieces$56.50 each
- 7 pieces$55.50 each
- 13 pieces$54.50 each
- 25 pieces$53.50 each
- 50 pieces$52.50 each

Description

A beechwood plaque award is cut from one piece of pale blond beech, thick enough to stand on its own, with the top edge shaped into a slow S curve wave. Union stewards, school boards and long service committees hand it over when a flat certificate would have been forgotten.

Twenty five year anniversaries, retirement dinners, apprenticeship completions and donor thanks all sit well on wood, and because the piece is 1.375 inches thick it stands on a shelf without a stand, a strut or a wall fixing. Three sizes are made, 4.75 by 6.25 inches, 5 by 7 inches and 5.5 by 7.875 inches. Laser engraving cuts the wording dark brown into the face, includes one colour fill and covers up to 4.75 by 7.125 inches on the largest, which is room for a ribbon banner above a name and a paragraph of citation below it. Full colour printing is the other route when a crest has to appear in its own shades. One piece is enough to place an order.

A committee marking a whole career, rather than a milestone inside one, often steps up to the promotional marine swords shadow box, which frames insignia and memorabilia behind glass on a wall. The wave top piece suits an annual cycle of names; the shadow box suits the one presentation nobody repeats. Both belong to the wood awards and trophies group, so a programme can start on wood and stay there.

Send the names and the wording, and PPI will return an engraving proof set on the actual wave outline so nothing runs into the curve, then cut and finish within five working days.

Read full description