Senago 30 oz Copper-Lined Straw Bottle
You save $8.75 on 25
Order today, ships on Fri, Jul 24
- Dimensions
- 3-3/8" dia. x 10-3/8"
- Material
- Stainless Steel
- Packaging
- Bulk with Instructions
Description
The Senago 30 oz Copper-Lined Straw Bottle is a double-wall vacuum-insulated stainless steel bottle with a built-in straw lid and carry handle, built for daily hydration and bulk corporate gifting. The bottle holds 30 fluid ounces and keeps drinks cold for up to 30 hours.
The Senago 30 oz Copper-Lined Straw Bottle uses double-wall vacuum insulation with a copper lining and a powder-coated exterior, and the bottle measures 3-3/8 inches in diameter by 10-3/8 inches tall. Decoration is available in three methods. One-color screen printing covers a 3 inch by 5 inch panel on Side 1, a matching 3 inch by 5 inch panel on Side 2, and a 7.5 inch by 7 inch wrap panel with a side gap, listed by the supplier as Wrap with Gap; one color at one location is included as standard, with setup billed separately. Full-color digital printing uses the same three locations on each 3 inch by 5 inch side panel and the 7.5 inch by 7 inch Wrap with Gap panel. Laser engraving is limited to the two 3 inch by 5 inch side panels. All three decoration methods carry a 7 to 9 business day lead time out of the City of Industry, CA facility, though this item follows a separate DWA production schedule under special instructions DWA-SE25 rather than the standard drinkware timeline, and orders may ship from a California location. The bottle is FDA compliant and is listed under the BPA and Prop 65 compliance categories, is hand wash only, and should not go in the microwave or freezer. Bulk packaging ships 25 units per case at 23 lbs in a 26 inch by 17 inch by 11 inch carton, and imprint placement may vary slightly relative to the handle or lid opening depending on piece alignment.
Start your order to add a company logo to this copper-lined straw bottle.
Key Features
- 30 fluid ounce capacity — supports extended hydration without frequent refills.
- Double-wall vacuum insulation with a copper lining — keeps beverages cold for up to 30 hours.
- Powder-coated exterior finish — provides a painted surface over the stainless steel body, distinct from bare metal.
- Built-in straw lid — allows sipping without removing a cap.
- Integrated carry handle — supports single-hand transport.
- Body measures 3-3/8 inches in diameter by 10-3/8 inches tall — fits standard bag pockets and larger cup holders.
- Hand wash only — not rated for dishwasher cycles.
- Not microwave or freezer safe — limits use to hand-fillable liquids at room or refrigerated temperature.
- FDA compliant and listed under BPA and Prop 65 compliance categories — meets standard food-contact and California safety documentation.
- Three decoration methods offered: one-color screen printing, full-color digital printing, and laser engraving — gives buyers a choice of spot-color, full-color, or etched branding.
- Side print panels measure 3 inches by 5 inches on both Side 1 and Side 2 — two matching locations for logo placement.
- Wrap panel with a side gap measures 7.5 inches by 7 inches on screen printing and digital orders — a larger wraparound branding area, listed by the supplier as Wrap with Gap.
- One color at one location included in the base unit price — additional colors or locations add separate run and setup charges.
- Decoration setup runs $60.00 per color or design with a $25.00 re-setup fee within 24 months — lowers cost on repeat orders using existing artwork.
- Standard decoration lead time is 7 to 9 business days out of the City of Industry, CA facility — sets a predictable production window.
- Unit pricing ranges from $17.30 at 25 pieces to $16.30 at 1000 pieces — per-unit cost drops as order quantity increases.
- Ships in bulk packaging of 25 units per case at 23 lbs — case-based shipping simplifies bulk freight planning.
- $5.00 USD broken case fee on orders outside an exact case quantity — full-case orders avoid the added charge.
Specifications
- Dimensions
- 3-3/8" dia. x 10-3/8"
- Material
- Stainless Steel
- Packaging
- Bulk with Instructions
- Weight
- 0.92 lbs
Similar Products
Frequently Asked Questions
What is the minimum order quantity for the Senago 30 oz Copper-Lined Straw Bottle?
The Senago 30 oz Copper-Lined Straw Bottle has a minimum order of 25 units. Larger quantities unlock lower per-unit pricing — see the price tiers above. Our team can help you find the right quantity for your budget.
How long does production take for the Senago 30 oz Copper-Lined Straw Bottle?
Standard production for the Senago 30 oz Copper-Lined Straw Bottle runs a few business days after you approve your art proof, plus transit time. Rush options may be available — call our team to check your in-hands date.
What decoration method is used on the Senago 30 oz Copper-Lined Straw Bottle?
The Senago 30 oz Copper-Lined Straw Bottle is decorated using Screen Printing. We email a free digital art proof before production so you can confirm exactly how your logo will look.
Is there a setup fee for the Senago 30 oz Copper-Lined Straw Bottle?
A one-time setup charge applies to the Senago 30 oz Copper-Lined Straw Bottle to prepare your artwork for decoration. Reorders of the same design carry no new setup fee.
Can I get a sample of the Senago 30 oz Copper-Lined Straw Bottle before ordering?
Yes — request a sample of the Senago 30 oz Copper-Lined Straw Bottle to check quality and fit before placing a full order. Use the "Order Sample" button above or call our team at 1-888-212-5501.
You May Also Like
Talk to a Real Person
Questions about this product, your deadline, or a large order? Our team answers fast.
Product Information & Disclaimer
- Pricing and availability are subject to change without notice.
- Product colors may appear different on screen than in person.
- Listed sizes, weights, and capacities are approximate.
- Production time begins after artwork approval.
- All delivery dates are estimates only.
- Setup charges, where applicable, apply per imprint color and location.