Klaxon 23 oz Built-In Horn Tumbler

Description

Key Features

• ✓Stainless steel outer shell with a black polypropylene inner lining — separates the metal body from the drink with an insulating plastic liner.
• ✓Built-in horn in the lid — makes noise to cheer at games or signal an alert hands-free.
• ✓Color matched rubber press-on lid with built-in straw slits — seals the opening while holding a straw in place for on-the-go drinking.
• ✓Clear plastic straw with a color matched cap — keeps dirt out of the straw and helps prevent spills.
• ✓23 fluid ounce capacity — holds enough liquid for extended outdoor use between refills.
• ✓4 inch diameter and 9-3/4 inch height — sized to fit most vehicle cup holders and stadium seat pockets.
• ✓Hand wash only — avoids dishwasher heat and detergent that could compromise the shell-to-liner seal.
• ✓BPA free, FDA compliant, and Prop 65 compliant — meets food-contact and California consumer-safety standards.
• ✓A 1-color, 1-location screen print imprint comes included in the base unit price — keeps standard single-color branding out of the per-unit upcharge.
• ✓Screen print side locations measuring 2.25 inches by 3 inches on Side 1 and Side 2 — each includes one imprint color, with a second color available for $0.45 per unit.
• ✓Wraparound screen print location spanning 8 inches by 3 inches with no side gap in the layout — wraps the barrel in a continuous 2-color imprint for $0.45 per unit.
• ✓Gapped wrap screen print location sized 10.5 inches by 3 inches — covers most of the barrel in one included imprint color.
• ✓Screen print setup at $60.00 per color per screen with $25.00 re-setup within 24 months — lowers cost on repeat orders using existing artwork.
• ✓Screen print PMS color matching at $55.00 per color per order — locks imprint ink to an exact brand color.
• ✓Screen print production of 5 to 7 business days manufacturer overseas or 1 to 3 business days from West Coast stock — sets turnaround expectations by fulfillment source.
• ✓Laser engraving on Side 1 or Side 2 at 2 inches by 3 inches for $1.50 per location — offers a permanent decoration option on either face.
• ✓Laser engraving on the gapped wrap area at 10.5 inches by 3 inches for $3.00 per location — extends permanent engraving across a larger surface.
• ✓Laser setup at $60.00 per design with $25.00 re-setup within 24 months, producing in 2 to 4 business days manufacturer overseas or 1 to 3 business days from West Coast stock — a faster turnaround path than screen printing.
• ✓Ships 20 units per case at 20 lbs, packed 21 inches by 17 inches by 12 inches in tissue paper inside an egg crate — supports freight and receiving planning for bulk orders.