
Carnival RPET Cooler Tote
You save $10.00 on 100
Order today, ships on Tue, Jul 21
- Dimensions
- 15-3/8" x 12-1/2" x 6"
- Packaging
- Bulk
- Weight
- 0.2 lbs
Description
The Carnival RPET Cooler Tote is a soft-sided insulated cooler tote made from 80GSM recycled P.E.T. non-woven fabric spun from 100% post-consumer water bottles, built for carrying lunches, picnic spreads, and concert coolers in a single zippered compartment.
The Carnival RPET Cooler Tote measures 15-3/8 inches by 12-1/2 inches by 6 inches and closes through a top zipper into a large-volume interior compartment expanded by a 6-inch gusset. The exterior uses 80GSM recycled non-woven P.E.T. fabric made from 100% post-consumer water bottles, while the interior lining combines PE foam with aluminum foil insulation to help block outside temperature transfer. A gray woven trim separates the black bottom panel from the colored top panel, and 24-inch non-woven carry handles match the body color. A one-color, one-location screen print imprint is included in the design. Screen printing carries a 2 to 4 business day manufacturing lead time with no warehouse-carry lead time offered; each of the two available print locations, Side 1 and Side 2, accepts a single color in a 9.5-inch by 4.5-inch area. Heat transfer decoration is also available, with a 3 to 5 business day lead time and no warehouse-carry lead time offered, and full-color imprint coverage in the same 9.5-inch by 4.5-inch area on Side 1 or Side 2. Bulk packaging ships 50 units per carton at 10 lbs in a 19-inch by 15-inch by 16-inch case. The tote meets FDA and Prop 65 compliance standards.
Customize this design to add your logo and colors for a branded cooler tote ready for lunches, picnics, and concerts.
Key Features
- 80GSM recycled non-woven P.E.T. fabric spun from 100% post-consumer water bottles — gives the exterior a recycled-material sourcing instead of virgin plastic.
- 6-inch gusset with a zippered top closure — expands the main compartment for large-volume loads and keeps contents secured in transit.
- PE foam and aluminum foil interior insulation — helps block outside temperature transfer from reaching stored contents.
- Gray woven trim dividing a black bottom panel from a colored top panel — creates a two-tone panel layout that stands out from single-tone totes.
- 24-inch non-woven carry handles that match the body color — long enough for over-the-shoulder carry to lunches, picnics, or concerts.
- Overall bag size of 15-3/8 inches by 12-1/2 inches by 6 inches — sized to carry multiple food containers or picnic items in one trip.
- Volume price breaks from $4.72 per unit at 100 pieces to $3.87 per unit at 2,500 pieces — lowers per-unit cost as order quantity grows.
- One-color, one-location screen print run charge included in base pricing, with setup billed separately — keeps standard single-color branding out of the per-unit price.
- Screen print setup priced at $60.00 per color per screen, with a $25.00 re-setup fee within 24 months — reduces cost on reorders placed inside the two-year window.
- Screen print imprint area of 9.5 inches by 4.5 inches on Side 1 or Side 2, one color per location — offers two independent branding placements at $0.45 per added location.
- Screen print manufacturing lead time of 2 to 4 business days — supports faster in-hands timelines for standard orders.
- Full-color heat transfer decoration in the same 9.5-inch by 4.5-inch area for $1.25 per run — allows multi-color logos where single-color screen print will not work.
- Heat transfer setup priced at $60.00 per design, with a $25.00 re-setup fee within 24 months — lowers cost on repeat full-color reorders.
- Heat transfer manufacturing lead time of 3 to 5 business days — one to three days longer than screen print for full-color artwork.
- Bulk packaging of 50 units per carton at 10 lbs, in a 19-inch by 15-inch by 16-inch case — simplifies freight and warehouse planning for larger orders.
- FDA and Prop 65 compliance — meets standard U.S. food-contact and California environmental disclosure requirements.
Specifications
- Dimensions
- 15-3/8" x 12-1/2" x 6"
- Packaging
- Bulk
- Weight
- 0.2 lbs
Similar Products
Frequently Asked Questions
What is the minimum order quantity for the Carnival RPET Cooler Tote?
The Carnival RPET Cooler Tote has a minimum order of 100 units. Larger quantities unlock lower per-unit pricing — see the price tiers above. Our team can help you find the right quantity for your budget.
How long does production take for the Carnival RPET Cooler Tote?
Standard production for the Carnival RPET Cooler Tote runs a few business days after you approve your art proof, plus transit time. Rush options may be available — call our team to check your in-hands date.
What decoration method is used on the Carnival RPET Cooler Tote?
The Carnival RPET Cooler Tote is decorated using Screen Printing. We email a free digital art proof before production so you can confirm exactly how your logo will look.
Is there a setup fee for the Carnival RPET Cooler Tote?
A one-time setup charge applies to the Carnival RPET Cooler Tote to prepare your artwork for decoration. Reorders of the same design carry no new setup fee.
Can I get a sample of the Carnival RPET Cooler Tote before ordering?
Yes — request a sample of the Carnival RPET Cooler Tote to check quality and fit before placing a full order. Use the "Order Sample" button above or call our team at 1-888-212-5501.
You May Also Like
Talk to a Real Person
Questions about this product, your deadline, or a large order? Our team answers fast.
Product Information & Disclaimer
- Pricing and availability are subject to change without notice.
- Product colors may appear different on screen than in person.
- Listed sizes, weights, and capacities are approximate.
- Production time begins after artwork approval.
- All delivery dates are estimates only.
- Setup charges, where applicable, apply per imprint color and location.








































