Skip to main content
Promotional Product Inc
BPA-FreeFDA CompliantInsulated
Recycled stainless steel water bottle standing upright with silver accent trim
Screw cap lifted away from the tall reusable drinking bottle
Side profile showing the smooth printable body and narrow neck
Angled shot of the metallic ring detail below the closure
Top-down look into the open mouth of the bottle
Ten-inch vessel photographed against a plain studio backdrop
Slim silhouette suited to standard car cup holders
Base of the container viewed from a low angle
Bottle held upright in one hand during a walk
Threaded neck detail where the cap seals tight
Rear view leaving the print panel fully visible
Two bottles standing together for an easy finish comparison
Front panel showing where a logo would be applied
Three-quarter angle emphasizing the tapered shoulder shape
Sealed bottle resting on a desk beside a notebook
Detail of the accent band circling the lower body
Full-height view with the closure fastened shut
Group arrangement showing several finish options together
Grip-friendly diameter shown as fingers wrap the container
Overhead perspective of the fastened cap and its ridged edge
Reusable water bottle packed inside an open gym bag
Left-facing stance with light catching the polished surface
Cap and body separated to show interior capacity
Tall drink vessel photographed beside a size reference
Front-on framing with even lighting across the print zone
Slight tilt revealing both the shoulder and lower curve
Lid ridges shown up close for easy twisting
Bottle standing on a kitchen counter ready to refill
Mirror-like exterior reflecting soft studio light
Straight-on comparison of two available finishes
Narrow-mouth opening pictured without its closure
Sixteen-ounce capacity shown in a full-length product shot
Rounded shoulders taper toward the sealing collar
Portable hydration bottle tucked into a backpack side pocket
Upright pose highlighting the seamless one-piece body
Wide framing shows the entire container from cap to base

16 Oz. Swiggy Recycled Stainless Steel Bottle

SKU 1252264
Colors (6)
SilverNavyBlackWhiteBlueRed
MSRP $19.85 SAVE 2%
$19.45/unit · 50 qtyRecycled stainless steel outer and inner walls — built with reclaimed metal content

You save $20.00 on 50

Order today, ships on Thu, Jul 30

Dimensions
10" H
Packaging
Must be ordered in full carton quantities. Assorted colors must be ordered in full carton increments.
Setup $40.00 Free digital proof
110% Price Match Lowest Price Online Free Visual Proof Free Samples
IMPRINT
Silkscreen
Imprint Area Silkscreen
QTY
Add 50 units → save $254.00
Subtotal · 50 × $19.45$972.50
You save−$20.00
Digital Visual ProofFree Visual Proof
ShippingConfirmed on review
TOTAL$972.50
TALK TO A SPECIALIST
1-888-212-5501
✓ No charge until you approve the proof🛡 100% satisfaction guarantee
from
$19.45/unit
110% Price Match Free Visual Proof 100% Satisfaction Guarantee

Description

16 Oz. Swiggy Recycled Stainless Steel Bottle fits sustainability campaigns and eco-conscious corporate gifting. Built from recycled stainless steel with vacuum-insulated double wall construction, it keeps drinks cold up to 24 hours or hot up to 12 hours through a wide mouth opening.

Standing 10 inches tall, the 16 Oz. Swiggy Recycled Stainless Steel Bottle comes in black, blue, navy, red, or white, all with silver accents. Standard silk-screen printing covers a 2 1/2-inch by 2 1/2-inch area in up to two colors, with a wraparound option at 5 inches by 2 1/2 inches or an oversized vertical option at 2 inches by 4 1/2 inches, silk-screen only and limited to one color. An optional 4-color process imprint runs 3 3/4 inches by 2 1/2 inches, and a second side imprint or silver laser engraving on the bottle or lid can be added, with no oxidation risk. An optional carabiner ships unattached. It ships in full carton quantities, with assorted colors ordered in full carton increments. Hand washing is recommended, and it meets FDA requirements while staying BPA free. Made in China.

Request a quote to add your logo to this recycled steel bottle.

Key Features

  • Recycled stainless steel outer and inner walls — built with reclaimed metal content
  • Double wall vacuum insulated construction — locks in temperature for hours
  • Keeps drinks cold up to 24 hours and hot up to 12 hours — vacuum seal maintains temperature through a full workday
  • Screw-on spill-resistant lid — secure closure with a wide mouth opening for easy filling and cleaning
  • 16 oz capacity — sized for a standard daily refill
  • 10\" H approximate size — tall, slim profile for bags and bike cages
  • 2 1/2\" W x 2 1/2\" H silk-screen imprint area — standard single-side decoration zone
  • Optional 4-color process imprint up to 5 3/4\" W x 2 1/2\" H — supports full-color photographic graphics
  • Optional laser engraving on bottle or lid — engraves silver with no oxidation
  • BPA free — made without bisphenol A plastics
  • Meets FDA requirements — cleared as safe for food and beverage contact
  • Hand wash recommended — protects the vacuum seal and finish
  • 25 units per carton — ships at 19 lbs per 15\" x 15\" x 11\" box

Specifications

Dimensions
10" H
Packaging
Must be ordered in full carton quantities. Assorted colors must be ordered in full carton increments.

Similar Products

Frequently Asked Questions

What is the minimum order quantity for the 16 Oz. Swiggy Recycled Stainless Steel Bottle?

The 16 Oz. Swiggy Recycled Stainless Steel Bottle has a minimum order of 50 units. Larger quantities unlock lower per-unit pricing — see the price tiers above. Our team can help you find the right quantity for your budget.

How long does production take for the 16 Oz. Swiggy Recycled Stainless Steel Bottle?

Standard production for the 16 Oz. Swiggy Recycled Stainless Steel Bottle runs a few business days after you approve your art proof, plus transit time. Rush options may be available — call our team to check your in-hands date.

What decoration method is used on the 16 Oz. Swiggy Recycled Stainless Steel Bottle?

The 16 Oz. Swiggy Recycled Stainless Steel Bottle is decorated using Silkscreen. We email a free digital art proof before production so you can confirm exactly how your logo will look.

Is there a setup fee for the 16 Oz. Swiggy Recycled Stainless Steel Bottle?

A one-time setup charge applies to the 16 Oz. Swiggy Recycled Stainless Steel Bottle to prepare your artwork for decoration. Reorders of the same design carry no new setup fee.

Can I get a sample of the 16 Oz. Swiggy Recycled Stainless Steel Bottle before ordering?

Yes — request a sample of the 16 Oz. Swiggy Recycled Stainless Steel Bottle to check quality and fit before placing a full order. Use the "Order Sample" button above or call our team at 1-888-212-5501.

You May Also Like

Talk to a Real Person

Questions about this product, your deadline, or a large order? Our team answers fast.

Product Information & Disclaimer
  • Pricing and availability are subject to change without notice.
  • Product colors may appear different on screen than in person.
  • Listed sizes, weights, and capacities are approximate.
  • Production time begins after artwork approval.
  • All delivery dates are estimates only.
  • Setup charges, where applicable, apply per imprint color and location.